Unitestcalibration
Typically replies within 10 minutes
Unitestcalibration
Hello šŸ‘‹ How can we help you?

What are the common thermometer calibration issues and how Unitest Calibration resolves them?

What are the common thermometer calibration issues and how Unitest Calibration resolves them?
Be it the healthcare, food safety or manufacturing industry, accurate measurement of temperature is critical in every industry. However, it is common for thermometers to develop calibration issues over time which can lead to inaccuracy in readings. When it comes to thermometer calibration in Singapore, Unitest Calibration provides reliable performance consistently over the years.

Common issues in thermometer calibration

Several problems can occur leading to inaccuracy in thermometer readings. Some common ones are:
  1. Drift over time
Either due to prolonged use and aging of the sensor or exposure to extreme weather grounds, thermometers can experience sensor drift. This happens especially in the case of digital thermometers. Readings are prone to deviate over time from the actual temperature in most thermometers found on the market.
  1. Environmental interface
External factors like atmospheric pressure, humidity or electromagnetic interference can also fluctuate thermometer readings to a large extent. In laboratory or industry settings, this can create a lot of issues.
  1. Incorrect initial calibration
There can be inaccuracy in the factory calibration of the thermometer itself. It is one of the most common errors that can lead to systematic calibration errors.
  1. Offset efforts
Errors can accumulate over time in thermometers so they might consistently give readings slightly higher or lower than the exact value.
  1. Sensor Lag
Some thermometers have an inherently lagging sensor leading to discrepancies in readings.
  1. Hysteresis
When a thermometer gives different accuracy of readings to a temperature rising versus a temperature falling, this problem is known as hysteresis. This inconsistency can cause a huge issue in industry settings where precise control is required over temperature fluctuations.

How can Unitest Calibration resolve these issues?

Unitest Calibration is the perfect solution to all the problems mentioned above. They are the providers of one of the most trusted and reliable thermometer calibration services in Singapore. Some of its best features are:
  1. Compensating for environmental factors:
Unitest Calibration has designed thermometer calibration in Singapore that is completely resistant to external temperature conditions. It does not matter how high the humidity or how low the atmospheric pressure is, Unitest Calibration always ensures accuracy in measurement.
  1. Correct initial calibration setup
Unitest Callibrationā€™s thermometers are initially calibrated at the perfect temperature at the factory. It ensures that thermometer readings are accurate in all settings.
  1. No offset errors
Unitest Callibrationā€™s thermometer readings are adjusted based on an accurate baseline. Even if the external temperature is abruptly changing, the thermometer will automatically be recalibrated to the correct reference temperature.
  1. No sensor drift
Unitest Callibrationā€™s thermometers have sensors that are quick to detect any inaccuracy or error. This ensures that correct readings are provided by the thermometer consistently over long periods.
  1. Detects and adjusts for hysteresis
Unitest Calibration thermometers automatically adjust to temperature at different levels.Ā  It identifies any hysteresis-related inconsistency and automatically makes all adjustments required. It leads to sharp accuracy of the temperature measurement. Unitest Calibration provides the best calibration services in Singapore. There are so many things that can go wrong when you use an average thermometer from the market and make a negative impact on your business. But Unitest Calibration always ensures high performance with consistency.

GET IN TOUCH

    Exclusive for new and young couples only!

    -->