SAC-SINGLAS Accredited · ISO/IEC 17025
Industrial Oven / Furnace Calibration in Singapore
Unitest calibrates industrial ovens and furnaces in Singapore across -80 °C to 1000 °C (temperature enclosure scope), under SAC-SINGLAS accreditation LA-2023-0845-C (ISO/IEC 17025). Standard turnaround is 5–7 working days; express service is 2–3 days, with free collection and delivery in Singapore for orders above $300.
Also known as: Industrial Oven · Furnace · Temperature Enclosure
Why calibrate?
Unitest calibrates and temperature-maps industrial ovens and furnaces in Singapore over a range of up to 1000°C, with traceable ISO/IEC 17025 certificates. Calibration verifies set-point accuracy and temperature uniformity — critical for heat treatment, curing and manufacturing.
What you receive
What industrial oven / furnace calibration at Unitest covers
Traceable certificate
Calibration certificate with an unbroken traceability chain to national and international standards, recording the as-found condition before any adjustment.
Stated uncertainty
Results reported with measurement uncertainty, so you know exactly how much confidence each reading carries in your quality system.
5–7 day turnaround
Standard turnaround 5–7 working days; express 2–3 working days on request. Free collection and delivery within Singapore for orders above S$300.
Part of our chamber & freezer calibration service, accredited under SAC-SINGLAS LA-2023-0845-C.
How often
How often should a industrial oven / furnace be calibrated?
Industrial ovens and furnaces should be calibrated at least every 12 months. Aerospace (AMS2750) or pharmaceutical validation schedules may require quarterly calibration.
Accredited ranges
Industrial Oven / Furnace calibration ranges & measurement uncertainty
The parameters, ranges and calibration & measurement capability (CMC) below are taken from our SAC-SINGLAS Schedule of Accreditation (LA-2023-0845-C, to ISO/IEC 17025). CMC is the smallest measurement uncertainty we can achieve under accredited conditions.
Temperature Enclosure (Freezers, Oven & Furnaces) (Lab / Site)· UNI-T010 Rev:0
| Range / measured quantity | Measurement uncertainty (CMC) |
|---|---|
| -80 °C – -40 °C | 0.4 °C |
| -40 °C – 50 °C | 0.4 °C |
| 50 °C – 160 °C | 0.4 °C |
| 160 °C – 200 °C | 1.1 °C |
| 200 °C – 600 °C | 2.6 °C |
| 600 °C – 800 °C | 2.6 °C |
| 800 °C – 1000 °C | 3.7 °C |
You can also verify our accreditation on the SAC-SINGLAS directory.
Questions
Industrial Oven / Furnace calibration FAQ
How often should a industrial oven / furnace be calibrated?
Industrial ovens and furnaces should be calibrated at least every 12 months. Aerospace (AMS2750) or pharmaceutical validation schedules may require quarterly calibration.
Is industrial oven / furnace calibration accredited?
Yes. Industrial Oven / Furnace calibration is covered under our SAC-SINGLAS scope of accreditation (LA-2023-0845-C, ISO/IEC 17025), covering -80 °C to 1000 °C (temperature enclosure scope). Certificates state the measured values and measurement uncertainty, traceable to national and international standards. Where an instrument falls outside the accredited ranges, we can calibrate it as a traceable service instead.
How long does industrial oven / furnace calibration take?
Standard turnaround is 5 to 7 working days; express service is 2 to 3 working days. Collection and delivery in Singapore are free for orders above $300.
Can you calibrate my brand of industrial oven / furnace?
Almost certainly — the makes listed on this site are simply the ones customers most commonly send in. Send us the make and model and our engineers will confirm whether it falls within our accredited scope or can be calibrated as a traceable service.
Related
Related instruments
Freezer / Chiller / Cold Room
Freezer / Chiller / Cold Room calibration →Laboratory Incubator
Laboratory Incubator calibration →Browse every instrument type on the Find Your Instrument page.
Need industrial oven / furnace calibration?
Submit your instrument list — we'll confirm capability, turnaround and pricing, no obligation.