SAC-SINGLAS Accredited · ISO/IEC 17025
Pressure Transducer Calibration in Singapore
Unitest calibrates pressure transducers in Singapore across -13 psi to 1000 psi pneumatic and up to 10,000 psi hydraulic, under SAC-SINGLAS accreditation LA-2023-0845-C (ISO/IEC 17025). Standard turnaround is 5–7 working days; express service is 2–3 days, with free collection and delivery in Singapore for orders above $300.
Also known as: Pressure Measurement Transducer · Absolute Pressure Sensor
Why calibrate?
Unitest calibrates pressure transducers in Singapore over a pneumatic range of -13 psi to 1000 psi and hydraulic range up to 10000 psi, with traceable ISO/IEC 17025 certificates. Transducers are checked at multiple span points to confirm linearity, repeatability and full-scale accuracy.
What you receive
What pressure transducer calibration at Unitest covers
Traceable certificate
Calibration certificate with an unbroken traceability chain to national and international standards, recording the as-found condition before any adjustment.
Stated uncertainty
Results reported with measurement uncertainty, so you know exactly how much confidence each reading carries in your quality system.
5–7 day turnaround
Standard turnaround 5–7 working days; express 2–3 working days on request. Free collection and delivery within Singapore for orders above S$300.
Part of our pressure calibration service, accredited under SAC-SINGLAS LA-2023-0845-C.
How often
How often should a pressure transducer be calibrated?
Pressure transducers should be calibrated every 12 months. High-cycle or vibration-exposed transducers may need calibration more frequently.
Accredited ranges
Pressure Transducer calibration ranges & measurement uncertainty
The parameters, ranges and calibration & measurement capability (CMC) below are taken from our SAC-SINGLAS Schedule of Accreditation (LA-2023-0845-C, to ISO/IEC 17025). CMC is the smallest measurement uncertainty we can achieve under accredited conditions.
Pneumatic Pressure Instruments (Lab & Site)· UNI-P001 Rev:0
| Range / measured quantity | Measurement uncertainty (CMC) |
|---|---|
| -13 psi to 30 psi | 0.008 psi |
| 30 psi to 1000 psi | 0.25 psi |
Hydraulic Pressure Instruments (Lab & Site)· UNI-P002 Rev:0
| Range / measured quantity | Measurement uncertainty (CMC) |
|---|---|
| 0 psi to 1000 psi | 0.25 psi |
| 1000 psi to 10000 psi | 2.5 psi |
You can also verify our accreditation on the SAC-SINGLAS directory.
Questions
Pressure Transducer calibration FAQ
How often should a pressure transducer be calibrated?
Pressure transducers should be calibrated every 12 months. High-cycle or vibration-exposed transducers may need calibration more frequently.
Is pressure transducer calibration accredited?
Yes. Pressure Transducer calibration is covered under our SAC-SINGLAS scope of accreditation (LA-2023-0845-C, ISO/IEC 17025), covering -13 psi to 1000 psi pneumatic and up to 10,000 psi hydraulic. Certificates state the measured values and measurement uncertainty, traceable to national and international standards. Where an instrument falls outside the accredited ranges, we can calibrate it as a traceable service instead.
How long does pressure transducer calibration take?
Standard turnaround is 5 to 7 working days; express service is 2 to 3 working days. Collection and delivery in Singapore are free for orders above $300.
Can you calibrate my brand of pressure transducer?
Almost certainly — the makes listed on this site are simply the ones customers most commonly send in. Send us the make and model and our engineers will confirm whether it falls within our accredited scope or can be calibrated as a traceable service.
Related
Related instruments
Pressure Gauge
Pressure Gauge calibration →Pressure Transmitter / Sensor
Pressure Transmitter / Sensor calibration →Differential Pressure Instrument
Differential Pressure Instrument calibration →Browse every instrument type on the Find Your Instrument page.
Need pressure transducer calibration?
Submit your instrument list — we'll confirm capability, turnaround and pricing, no obligation.